400MPa Hydraulic Cold Isostatic Press Machine With Cylinder Diameter Within 300mm

Advantages

The equipment has a compact structure and a low mechanical failure rate

A work cycle can be completed within 3 minutes at the fastest, with a very high production efficiency

The floor space is smaller than that of other production models of the same caliber

The equipment automatically lifts materials without the need for auxiliary lifting devices

The turbocharger is of the one-time pressurization type, which has low requirements for the technical proficiency of the equipment users and maintenance personnel

To ensure the safe production needs of the press, multiple safety protection devices are installed on the press.

1. Manual pressure relief valve. In case of emergency or malfunction, this valve can be manually opened for pressure relief protection of the press. Only after it is closed can the pressure be raised again.

2. The hydraulic system has a preset pressure value. Once the preset pressure value is exceeded, the relief valve will automatically overflow.

3. Pressure sensors and electrical control systems. When the working pressure exceeds the preset pressure value, the electrical control system automatically stops the operation of the pressure-increasing system.

4. The control cabinet is equipped with a stop button for operation. Once started, the press can be stopped in the middle of any working stage

5. Interlocking of electrical control programs. The press operates strictly in accordance with the working procedures. If the previous procedure is not completed or a fault occurs, the next procedure cannot be carried out and a fault information will be sent. Only after the fault is eliminated can the next procedure be continued.

Technical parameters